Ultrasonic Plastic Welder KWD2620-N

分類: Ultrasonic Plastic Welding Machine

華超音波（株）

国: 台湾

電話番号: 886-2-22980299

連絡先: Mr. Chen

お問い合わせ

Full automatic frequency type ultrasonic plastic welder and synchronized with European and American technology.

Automatic frequency self-checking at startup.
Automatic tuning (frequency control).
Resonance frequency compensation during the welding cycle.
Full-Bridge IGBT module drives the transducer.
PWM (Pulse Width Modulation) amplitude control, linear adjustment from 50%~100%.
PWM (Pulse Width Modulation) startup vibration (8 selective ramp start-up settings).
Protection against ultrasonic frequency deviation, high voltage and over current.
External control box display ultrasonic frequency and welding energy.
Frequency compensation as horn’s working temperature increase.
Abnormal welding alarm.
RS485 communication interface.
3 welding modes：Time mode/ Trigger pressure mode/ Energy mode (target & interval setting).
Monitor and transmit each welding parameters and status (requires remove the control box and connect to the computer).

MODE		KWD2615-N	KWD2620-N
SPEC	OUTPUT	2600W
	FREQUENCY	15KHz	20KHz
	LINE SOURCE	AC220V ,15A, 50/60HZ,1P
POWER SYSTEM	ULTRASONIC SYSTEM	Automatic frequency self-checking at startup
		Full-Bridge IGBT modules are used in the generator to improve durability
		Automatic frequency control, no need to adjust the horn’s resonance
		PWM (Pulse Width Modulation) amplitude control, linear adjustment from 50%~100%
		PWM (Pulse Width Modulation) startup vibration control to avoid horn shaking during high voltage startup and protect the horn
		Protection against ultrasonic frequency deviation, high voltage and over current
		Frequency compensation as horn’s working temperature increased
		Resonance frequency compensation during the welding cycle to improve welding ability
		8 selective start-up settings for ultrasonic activation to match various requirements of horn's design
		LED displays the percentage of ultrasonic power loading
	CONTROL SYSTEM	LCD display timing parameter & welding counter
		LCD display ultrasonic frequency and welding energy (external control box)
		Machine’s panel can set delay /welding/holding time (0.01-9.99 sec) and counter zero
		Time mode can set delay /welding/holding time
		Trigger mode can set trigger pressure by variable resistor
		Energy mode can set welding energy target or interval
		Abnormal welding alarm
		Electronic pressure sensor detect the trigger pressure
		Synchronous dual start button & cylinder up / ultrasonic emergency stop button
MECHANICAL SYSTEM		AIR SOURCE：6kg/cm²
		CYLINDER：Ø63mm /　● STROKE：75mm
		COLUMN： Ø 100 mm
		The downward speed of the horn is adjusted in two stages from fast to slow to improve welding stability
		Using precision liner guides to lift horn and ensure welding stability
		Use the rotating scale knob to adjust the downward position of the horn, which does not hinder the disassembly of the horn
GENERATOR DIMENSION		405×145×286mm (L×W×H)
GENERATOR WEIGHT		8Kgs
MACHINE DIMDENSION		677×408(+165) ×1040-1400mm (L×W×H)
MACHINE WEIGHT		91Kgs