PP/PE Film Washing System
カテゴリー : 洗浄・選別ライン
The PE/PP film wash line system is designed for washing plastic films with contamination levels exceeding 80% Minimizing the recycling water flow rate and evaporation losses. The pre-treatment module of the system is equipped wear resistant design to maximize system up time. Pre-shredding and pre-washing system removes a large percentage of abrasive materials (sand, grit etc.) to protect the rest of the system. Shredding system is designed specifically for film materials to create a uniform particle size which is easy for washing and drying. High speed washing system optimized according to the specific material type liberates and separates contamination from film flakes. Under water force-washing paddles in our washing tanks maximize the washing efficiency. Our drag chain discharge device regulates the material discharge speed and minimizes the water volume sent to the drying process with the product. Mechanical (centrifugal and squeezing) and thermal drying systems control the moisture content of the finished product. At < 5% moisture the material is suitable for high quality pelletizing. Shredding, high speed washing and drying stages are optimized to avoid over processing which can cause material loss (fines creation). Intelligent system automation ensures that components actions are sequenced and monitored. Therefore, system capacity is maximized, and the system is effectively protected against un-shredable materials.
P.P. HIGH SPEED PLASTIC INFLATION MACHINE : KPP-65/75
カテゴリー : ブローンフィルム押出機
The KPP-65/75 is a high-speed P.P. plastic inflation (blown film extrusion) machine available in two widths — 650 mm (KPP-65) and 900 mm (KPP-75) — for applications such as plastic garment bags. The KPP-65 runs a Ø 65 mm screw (28:1 L/D ratio) with a 30 HP AC driving motor, a Ø300 mm die, and a Ø450 mm air ring; the KPP-75 runs a Ø 75 mm screw with a 40 HP AC driving motor, a Ø450 mm die, and a Ø700 mm air ring. Film thickness is 0.025-0.10 mm for both, with output of 28-60 kgs/hr (KPP-65) and 30-70 kgs/hr (KPP-75). Model: KPP-65 / KPP-75 Suitable material: P.P. Film thickness: 0.025-0.10 mm Film width range: 650 mm (KPP-65) / 900 mm (KPP-75) Film output: 28-60 kgs/hr (KPP-65) / 30-70 kgs/hr (KPP-75) Screw diameter/type: Ø 65 mm / Ø 75 mm, L/D ratio 28:1 Driving motor: AC 30 HP (KPP-65) / AC 40 HP (KPP-75) + Inverter Machine dimension: 500x200x400 cm (KPP-65) / 730x450x470 cm (KPP-75)
P.P. HIGH SPEED PLASTIC INFLATION MACHINE : KPP-45/55
カテゴリー : ブローンフィルム押出機
The KPP-45/55 is a high-speed P.P. plastic inflation (blown film extrusion) machine available in two widths — 400 mm (KPP-45) and 520 mm (KPP-55) — for applications such as plastic garment bags. The KPP-45 runs a Ø 45 mm screw (28:1 L/D ratio) with a 15 HP AC driving motor, a Ø150 mm die, and a Ø250 mm air ring; the KPP-55 runs a Ø 55 mm screw with a 20 HP AC driving motor, a Ø250 mm die, and a Ø350 mm air ring. Film thickness is 0.02-0.1 mm for the KPP-45 and 0.025-0.1 mm for the KPP-55, with output of 18-25 kgs/hr and 22-45 kgs/hr respectively. Model: KPP-45 / KPP-55 Suitable material: P.P. Film thickness: 0.02-0.1 mm (KPP-45) / 0.025-0.1 mm (KPP-55) Film width range: 400 mm (KPP-45) / 520 mm (KPP-55) Film output: 18-25 kgs/hr (KPP-45) / 22-45 kgs/hr (KPP-55) Screw diameter/type: Ø 45 mm / Ø 55 mm, L/D ratio 28:1 Driving motor: AC 15 HP (KPP-45) / AC 20 HP (KPP-55) + Inverter Machine dimension: 400x120x370 cm (KPP-45) / 450x180x425 cm (KPP-55)
P.P. HIGH SPEED PLASTIC INFLATION MACHINE : KPP-35
カテゴリー : ブローンフィルム押出機
The KPP-35 is a high-speed P.P. plastic inflation (blown film extrusion) machine, producing PP film at widths up to 300 mm for applications such as cloth packaging bags. The extruder uses a Ø 35 mm screw with a 28:1 L/D ratio and a 10 HP AC driving motor with inverter. The die unit uses a Ø120 mm die and Ø200 mm air ring with a 10-pcs water ring. Film thickness ranges from 0.02 to 0.10 mm, output reaches 12-18 kgs/hr, and the take-up unit runs at speeds up to 40 m/min. Model: KPP-35 Suitable material: P.P. Film thickness: 0.02-0.10 mm Film width range: 300 mm Film output: 12-18 kgs/hr Screw diameter/type: Ø 35 mm, L/D ratio 28:1 Driving motor: AC 10 HP + Inverter Die diameter: Ø120 mm / Air ring diameter: Ø200 mm Machine dimension: 300x100x350 cm
高速製袋機にパッチを適用
カテゴリー : プラスチック袋製袋機
序章 LY-800HPは、超高速の特殊なパッチハンドル製袋機です。 4セットのサーボモーターを搭載し、優れた性能を発揮します。ヒューマンマシンインターフェースは、簡単でフレンドリーな操作のための標準部品です。 特徴 高速パッチハンドル鞄製造機。 プリントバッグ用フォトセル1セット付きサーボシステム合計4セット。 設定が簡単なヒューマンマシンインターフェース。
ダイカッティング工作機械のリサイクルマシンにサイド材料
カテゴリー : ペレット化ライン
高速回転ねじり、騒音なし、温度制御の安定性、ダブル脱気 リサイクル材料の多様化 操作性が良い、伝統的なモデルより役立ちます。 二台のスクリーン交換機が装備されるので、機械を止めずにメッシュが交換できます。また、サブ押出機の交換時間を短縮しながら、容量を増やします。 二段押出機は汚れた材料に適します。 この機械は塊形の材料、ボトルリサイクルとマスターバッチの材料に対する高容量を持ちます。
直立型螺旋ブレードミキサーM-50-100-150-200
カテゴリー : 混合・攪拌機
●多型撹拌羽ハンドミキシングブレード着脱自在の●●の●タイマ機がハンド撹拌を備え、混合タンクは、ステンレス鋼で作られています
Granulators-GC Series
カテゴリー : 破砕・粉砕・造粒装置
GC Series Granulators are high speed granulation machines designed especially for the efficient size reduction of various materials in a single pass. These machines are ideal for processing a multitude of materials including plastics, rubber, fibers, copper cable and light non-ferrous metals amongst others.
粉砕、水洗い、乾燥のターンキーソリューション-プラスチックフィルム専用
カテゴリー : 破砕・粉砕・造粒装置
農業用プラスチックフィルム、PP編み込み袋、真空パック等各種のプラスチック材料に適します。 多様なプラスチック材料に適します。高比重材料と汚れた材料を分離するのが可能です。 高速洗浄装置が備わるので、装置にあるプラスチック材料は捻られて汚れが取れます。 ワイヤを保護するために、自動始動で完全な電気施設が備わります。 乾燥機が備わるので、水分を取ります。単一スクリューラビング乾燥装置で湿度を3%以下に抑えることができます。 原料の清潔度から、浮沈槽の数を1、2または3個所に決定します。
高速オフセット印刷機-PKF-4HSシリーズ
カテゴリー : フレキソ印刷機
このマシンは、ホイールプレスの選択のもう一つの大きな利点を提供しています、機械が高精度な印刷性能を提供することができるだけでなく、便利な正/負の印刷機能を提供します