LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-80
カテゴリー : ブローンフィルム押出機
The KML-80 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film up to 2,000 mm wide for applications such as plastic farm film and car film. The extruder unit is fitted with an Ø80mm screw at a 30:1 L/D ratio and a 75 HP AC driving motor with inverter, supported by 7-zone auto thermo control. The die unit uses an Ø500mm die and Ø550mm air ring, and the take-up unit runs at speeds up to 45 m/min across the 2000 mm effective width. Model: KML-80 Suitable material: LDPE/LLDPE Film thickness: 0.03-0.15 mm Film width range: 2000 mm Film output: 200 kgs/hr Screw diameter/type: Ø80mm, L/D ratio 30:1 Driving motor: AC 75 HP + Inverter Take-up speed: 45 m/min Machine dimension: 800×500×900 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-35
カテゴリー : ブローンフィルム押出機
The KML-35 is an LDPE/LLDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KML-35 processes film in 0.015-0.15 mm thickness at up to 500 mm width, with output between 10-30 kgs/hr. The extruder runs a Ø 35mm screw at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel, driven by an AC 10 HP motor with inverter. The die unit uses a Ø100 mm die with a Ø150 mm air ring, and the take-up section reaches speeds up to 75 m/min. Model: KML-35 Suitable material: LDPE/LLDPE Film thickness: 0.015-0.15 mm Film width range: 500 mm Film output: 10-30 kgs/hr Screw diameter: Ø 35mm, L/D ratio 26:1 Driving motor: AC 10 HP + Inverter Machine dimension: 400×120×380 cm
サーボ モーター制御が付いている機械を作る高速斜めの肩の洗濯袋 モデル: CWA+S-SV
カテゴリー : 用途別製袋機
サーボ モーター制御が付いている機械を作る高速斜めの肩の洗濯袋 モデル: CWA+S-SV
Label Cutting Machines CUT-300/400
カテゴリー : カッティングマシン
Introduction This cutting machine can convert a shrink sleeve label into pieces for manual application or integrate with a rewind unit for automatic application. The cutting system with a pillar-type cutting block can apply clean and accurate cuts at high speed. This cutting machine is also equipped with 75˚ and 90˚ horizontal perforation devices to make packaging easier to tear. This cutting machine allows shrink sleeve labels to be processed as required and meet manual and automatic application. Applications Suitable for manual and automatic shrink sleeve application. Ideal for the requirements of high speed and accurate cutting. Features Horizontal perforation device creates perforations across the material for easy tear. A precise cutting device can apply clean cuts even at high speeds. Rewind unit is an alternative for automatic shrink sleeve application. Specifications Unwind Width 300 / 400 mm Unwind Diameter 700 mm Rewind Diameter 500 mm Machine Speed 400 pcs/min. (Depending on cutting length)
LSインラインフレキソ印刷機LS-HS2(20〜130m / min)
カテゴリー : フレキソ印刷機
これは、押出機に準拠した高速タイプのインライン印刷機で、最大印刷速度は最大120M / minです。乾燥能力を拡大し、前後のカラー位置を調整できる360フロントおよびリアターニングギアシステムを使用します。印刷ジョブのマシン中に。同じように2つの印刷ステーション、印刷品質と動作を確認する便利な顧客、機械は片面2色の組み合わせを印刷できます-フィルムを制御するためのダンシングローラーと入力すると、乾燥チャンバーで非常に均一かつスムーズに印刷ステーションに入ります印刷されたパターンと色が高速に従って乾燥できることを確認し、継続的に印刷することで、操作の時間とプロセスを節約できます。
サイドエントリーロボットSSE
カテゴリー : 自動化・ロボット・ソフトウェア
SSEロボットは、サイクルタイムが6秒未満の薄肉製品向けに設計されています。その高速機能により、生産効率を向上させることができます。型締力400トン以下の射出成形機に適しています。
高速モノ押出コーティング&ラミネート機(WEL-Hシリーズ)
カテゴリー : 押出コーティング・ラミネート機
Webパスの無駄を節約し、フィルムの通し時間を最小限に抑えるため。マシンは、主要ブランドのT-Dieを採用して、安定した性能と一定の高品質のコーティングゲージを確保します。スクリューとバレルは、樹脂の混合を達成するために厳密に設計および処理されています。 PLC制御による機械全体の自動化と張力、およびノンストップタレット自動スプライシングによるすべてのアンリワインダー。機械の操作は非常にシンプルでユーザーフレンドリーです。モノ押出コーティング&ラミネーションマシンの高速バージョンは、自動エアギャップ調整ユニットや自動水温制御装置などのより高度な機器を採用しました。これらの追加機能により、生産中の多くの操作手順を節約できます。したがって、オペレーターは主要な操作に集中でき、完成品の品質を向上させることができます。このタイプのマシンは、より高い生産性の要求に適しています。
ラミネート機械
カテゴリー : 押出コーティング・ラミネート機
PLCステーション1-ラミネート速度制御-押出速度設定-ラミネートパラメータ設定-動作温度設定-ドライバステータス監視-生産添加剤の節約-故障警告情報-張力情報監視PLCステーション2-自動巻き戻し張力制御-直径検出制御-ダンサーローラー張力制御-自動切断ロール交換-接合接着面チェック-自動プリドライブ接合-自動インフィード張力制御-E/Pトランスデューサー制御PLCステーション3-自動巻き戻し張力制御-巻き戻しテープ張力制御-ダンサーローラー張力制御-自動切断ロールチェンジ-ノンストップロールチェンジ-自動長さカウント-自動アウトフィード張力制御-E/Pトランスデューサー制御
High-Speed Injection Molding Machine (SA-p Series)
カテゴリー : トグル式射出成形機
It is a newly-released servo hydraulic energy-saving model with outward toggle clamping unit, especially suitable for producing bucket containers. With clamping force ranging from 220 tons to 1,000 tons.