English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Ultrasonic Metal Welding Machine KWG2620-EW
カテゴリー : 溶着・表面処理装置
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Ultrasonic Metal Welding Machine KWG2620-E
カテゴリー : 溶着・表面処理装置
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
Ultrasonic Metal Welding Machine KWG0930-E
カテゴリー : 溶着・表面処理装置
Ultrasonic metal welding, generally for the fusion of low melting point metal materials such as copper, aluminum, etc. Taking the ultrasonic welding metal plate as an example, the two metal plates are overlapped and placed on the base, and the ultrasonic welding head is pressed against the coincident metal plate with appropriate pressure, and a lateral vibration of 20,000 to 40,000 times per second is applied. The two metal plate joints are subjected to high frequency vibration friction and welded. In this welding mode, the solvent is not required, and the welding portion does not need to pass current and heat, and is close to the cold joint, and the intermetallic compound is less likely to occur, and the structure changes little. The welding feature is that the deformation of the joint is less, the material is not melted, and the thermal influence of the material is not significantly changed. The fragile cast structure or the intermetallic compound can be obtained, and the fusion of the foil and the small joint can be achieved without strong resistance welding. Long foil can be applied by roller type continuous welding. KWG0935 model can be applied to lithium battery copper aluminum foil and aluminum nickel sheet welding, copper aluminum foil spot welding, capacitor copper aluminum foil spot welding, etc. KWG2020 model can be applied to lithium battery aluminum shell and aluminum nickel sheet welding, wire and terminal welding, wire butt welding, wire and metal plate welding, metal plate spot welding, etc........
ULTRASONIC CLEANING MACHINE BOX TYPE ULTRASONIC CLEANING MACHINE
カテゴリー : Cleaning Equipment
Overview and characteristics of ultrasonic cleaning machine ※ Ultrasonic cleaning is widely used, such as electrical appliances, electronics, automobiles, industrial machinery, etc.; optical lens degreasing, removal of surface attachments and cleaning parts, using a powerful ultrasonic cleaning machine with the cleaning Engineering to improve the production efficiency and the cleaning quality and working environment by using single-slot, multi-slot, and automatic methods.
ULTRASONIC CLEANING MACHINE SINGLE TANK ULTRASONIC CLEANING MACHINE
カテゴリー : Cleaning Equipment
Overview and characteristics of ultrasonic cleaning machine ※ Ultrasonic cleaning is widely used, such as electrical appliances, electronics, automobiles, industrial machinery, etc.; optical lens degreasing, removal of surface attachments and cleaning parts, using a powerful ultrasonic cleaning machine with the cleaning Engineering to improve the production efficiency and the cleaning quality and working environment by using single-slot, multi-slot, and automatic methods.
Uカップ
カテゴリー : Rubber Products & Parts
Uカップ（Uリング） は、その特徴的な「U」型断面にちなんで名付けられた多用途のリップシールです。往復運動用途向けに設計され、油圧および空気圧シリンダーの主要シールとして使用されます。 主な性能メリット 圧力活性化シール: U型形状により、シールリップがシステム圧力下でハードウェア表面に膨張します。圧力が上がるにつれて、シール力も比例して増加します。 二重用途設計: Uカップは ロッドシール（外部漏れ防止）および ピストンシール（シリンダーチャンバー内のバイパス防止）として機能します。 摩擦最適化: リップ形状により接触面積を最小化し、安全なシールを確保しながら、熱の発生や機械的摩耗を低減します。 バックアップリングとの相乗効果 高圧下での耐性: システムが 5 MPa（50 bar）を超える場合、Uカップとバックアップリングを組み合わせることで、クリアランスギャップへの押し出しを防ぎます。 構造サポート: バックアップリングにより、特に大きな押し出しギャップや高速サイクルの動的用途でUカップが安定します。 一般的な産業用材料 ポリウレタン（PU）: 優れた耐摩耗性と高せん断強度を持ち、重負荷の油圧システムに最適。 ニトリル（NBR）: 空気圧シリンダーおよび低圧環境での標準材料。 PTFE / POM: バックアップリングに使用され、高硬度のサポートを提供。
大型横型回転テーブル二成分射出成形機（HB-Rシリーズ）
カテゴリー : 横型射出成形機
これは、大型の家電製品やパネル、自動車の天窓、照明、コーナーウィンドウ、その他の2部品製造に適した大型の射出成形装置です。
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-55
カテゴリー : ブローンフィルム押出機
The KMTL-55 is a two-layer HDPE/LDPE/LLDPE high-speed plastic inflation (blown film extrusion) machine, producing two-layer PE film at widths up to 1,400 mm for applications such as car film and food plastic wrap. The extruder is built around a Ø 55mm x 2 screw with a 28:1 L/D ratio and a 30 HP AC driving motor with inverter. The die unit uses a Ø350 mm die and Ø400 mm air ring. Film thickness ranges from 0.025 to 0.15 mm, output reaches 20-150 kgs/hr, and the take-up unit runs at speeds up to 45 m/min. Model: KMTL-55 Suitable material: HDPE/LDPE/LLDPE Film thickness: 0.025-0.15 mm Film width range: 1400 mm Film output: 20-150 kgs/hr Screw diameter/type: Ø 55mm x 2, L/D ratio 28:1 Driving motor: AC 30 HP + Inverter Die diameter: Ø350 mm / Air ring diameter: Ø400 mm Machine dimension: 500x500x800 cm
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-40/45
カテゴリー : ブローンフィルム押出機
The KMTL-40/45 is a two-layer high-speed plastic inflation machine for blown film extrusion of HDPE, LDPE, and LLDPE resins, producing 2-layer PE film up to 800 mm (KMTL-40) or 900 mm (KMTL-45) wide for applications such as car film and food plastic wrap. The KMTL-40 runs twin Ø40mm screws with a 20 HP AC driving motor and 6-zone auto thermo control, producing film at 15-70 kgs/hr; the KMTL-45 runs twin Ø45mm screws with the same 20 HP AC driving motor and 2-zone auto thermo control, producing film at 20-90 kgs/hr. Both models operate at a 26:1 L/D ratio and a take-up speed of 70 m/min. Models: KMTL-40 / KMTL-45 Suitable material: HDPE/LDPE/LLDPE (both) Film thickness: 0.010-0.15 mm (both) Film width range: KMTL-40 800 mm; KMTL-45 900 mm Film output: KMTL-40 15-70 kgs/hr; KMTL-45 20-90 kgs/hr Screw diameter/type: KMTL-40 Ø40mm x2; KMTL-45 Ø45mm x2 (L/D ratio 26:1 both) Driving motor: AC 20 HP + Inverter (both) Take-up speed: 70 m/min (both) Machine dimension: KMTL-40 450×200×400 cm; KMTL-45 470×220×450 cm
TWO LAYER HDPE/LDPE/ LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMTL-65
カテゴリー : ブローンフィルム押出機
The KMTL-65 is a two-layer HDPE/LDPE/LLDPE high-speed plastic inflation (blown film extrusion) machine, producing two-layer PE film at widths up to 2,000 mm for applications such as car film and food plastic wrap. The extruder uses a Ø 65mm x 2 screw with a 28:1 L/D ratio and a 50 HP AC driving motor with inverter. The die unit is fitted with a Ø500 mm die and Ø550 mm air ring. Film thickness ranges from 0.03 to 0.15 mm, output reaches 60-250 kgs/hr, and the take-up unit runs at speeds up to 40 m/min. Model: KMTL-65 Suitable material: HDPE/LDPE/LLDPE Film thickness: 0.03-0.15 mm Film width range: 2000 mm Film output: 60-250 kgs/hr Screw diameter/type: Ø 65mm x 2, L/D ratio 28:1 Driving motor: AC 50 HP + Inverter Die diameter: Ø500 mm / Air ring diameter: Ø550 mm Take-up speed: 40 m/min
Co-rotating Twin Screw Underwater Pelletizing Compounding Line | CK-HT
カテゴリー : ペレット化ライン
CK-HT series Co-rotating Twin Screw Underwater Pelletizing Compounding Extrusion Line is designed especially for compounding materials with high viscosity, low MI, or difficulty to be shaped. The extrusion line can be applied to a wide range of materials and applications. Possible materials: TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
