English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Mould Dryer (AC)
Too high humidity in air may affect the quality of your mould surface because of the condensation forming on the moulded surface.
A mould dryer is perfect working with preform injection moulding machine.
The dry air from the mould dryer reduces the condensation while the mould is cooling.
That accurately controls the humidity around the mould to ensure your product in good quality.
-
P.I.D temperature controller system (IC control panel).
-
Abnormal warning display (IC control panel).
-
Motor overloading & phase-reversing protection.
-
The through-out air temperature from the mould dryer can be adjusted.
-
Special water-exhausting design.
| Mould Dryer / Mold Dryer (AC) | |||||
| Model | AC-3 | AC-5 | AC-7.5 | AC-10 | |
| AC-3G | AC-5G | AC-7.5G | AC-10G | ||
| Rated Power | kw | 6 | 9.6 | 13.9 | 15.8 |
| Heater | kw | 3 | 4.8 | 7.2 | 7.2 |
| Compressor Horsepower | hp | 3 | 5 | 7.5 | 10 |
| Pump Horsepower | hp | 1/2 | 1/2 | 1/2 | 1/2 |
| Fan Horsepower | hp | 1/2 | 1 | 1 | 1 |
| Air Volume | CMM | 28 | 48 | 48 | 58 |
| Air Pressure | mmAq | 50 | 68 | 68 | 68 |
| Cooling Capacity (60Hz) | kcal/h | 9000 | 22600 | 30000 | 45000 |
| Dew Point Temp | ℃ | 3~8 | 3~8 | 9~12 | 7~9 |
| Wet Bulb Temp | ℃ | 16~18 | 16~18 | 16~18 | 15~18 |
| Dry Bulb Temp | ℃ | 26~28 | 26~28 | 25~26 | 22~23 |
| Relative Humidity | % | 30~45 | 30~45 | 34~41 | 32~40 |
| Air Outlet Port | inch | 6 | 6 | 6 | 6 |
| Air Return Port | inch | 8 | 10 | 12 | 12 |
| Condensed Water Flow | I/min | 80 | 160 | 180 | 200 |
| Cold Water Pipe | inch | 1 | 1.5 | 1.5 | 1.5 |
| Drainage Pipe | inch | 1 | 1 | 1 | 1 |
| Refrigerant | R22 | ||||
| R407C | |||||
| Dimension(LxWxH) | cm | 90x96x156 | 95x191x168 | ||
| Approx.Weight | kg | 280 | 380 | 450 | 550 |
